Tenda O1 User Manual

151

When the factory settings are restored, the configuration of the CPE is lost. Therefore, you need to reconfigure the
CPE to connect to the internet. Restore the factory settings of the CPE only when necessary.

To prevent CPE damages, ensure that the power supply of the CPE is normal when the CPE is reset.

When the factory settings are restored, the login IP address is 192.168.2.1, and both login user name and password
are admin.
Configuration Procedure
Step 1 Choose Tools > Maintenance.
Step 2 Click Reset.
Step 3 Click OK on the pop-up window.
----End
A progress bar is displayed on the page. Wait for it to elapse.
9.2.3 Upgrade Firmware
This function upgrades the firmware of the CPE for more functions and higher stability.
To prevent damaging the CPE, verify that the new firmware version is applicable to the CPE before
upgrading the firmware and keep the power supply of the CPE connected during an upgrade.

Tenda O1 Specifications

General

5 GHz	No
Bandwidth	2.4 GHz
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Placement	Wall
Certification	FCC/CE/RoHS
Product color	White
LED indicators	LAN, PoE, WLAN
International Protection (IP) code	IP64
Output voltage	9 - 12 V
Power consumption (max)	2.6 W
Security algorithms	WEP, WPA-PSK, WPA2-PSK
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Antenna features	Integrated antenna
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-30 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	67.5 mm
Width	80 mm
Height	190.35 mm