EasyManuals Logo

Tenda O1 User Manual

Tenda O1
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #151 background imageLoading...
Page #151 background image
144
Parameters Description
Name
Description
Ping Watch Dog
It specifies whether to enable the Ping Watch Dog function.
IP Address
It specifies the target IP address that the device pings.
Ping Interval
It specifies the interval at which the device transmits packets to ping the target IP address.
Ping Startup Delay
It specifies the interval at which the device enables the Ping Watch Dog function after the device
reboots.
You can set this parameter to keep the device from rebooting repeatedly on account that the
system triggers Ping Watch Dog during rebooting while users cannot log in to the web UI of the
device to change the settings.
Threshold of Lost Packets
It specifies the threshold of lost packet that triggers reboot. Range: 1 to 65535, default: 3.
If N is set, the device will reboot automatically when it sends N Ping packets to target IP
address/domain name, and does not receive response.
8.6.7 DMZ Host
This function is available only when the CPE works in WISP or Router mode.
Overview
A DMZ host on a LAN can communicate with the internet without limit. You can set a computer that require
higher internet connection throughput, such as a computer used for video conferencing or online gaming, as a
DMZ host for better user experience.
A computer set to DMZ host is not protected by the firewall of the CPE.
A hacker may leverage the DMZ host to attack your LAN. Therefore, enable the DMZ function only when necessary.
Configuring DMZ Host
Configuration Procedure
Step 1 Choose Advanced > Network Service.
Step 2 Enable the DMZ Host function.
Step 3 Enter the IP address of the device to be set to DMZ host.
Step 4 Click Save on the bottom of this page.

Table of Contents

Other manuals for Tenda O1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda O1 and is the answer not in the manual?

Tenda O1 Specifications

General IconGeneral
5 GHzNo
Bandwidth2.4 GHz
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate300 Mbit/s
PlacementWall
CertificationFCC/CE/RoHS
Product colorWhite
LED indicatorsLAN, PoE, WLAN
International Protection (IP) codeIP64
Output voltage9 - 12 V
Power consumption (max)2.6 W
Security algorithmsWEP, WPA-PSK, WPA2-PSK
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports1
Antenna featuresIntegrated antenna
Cables includedLAN (RJ-45)
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-30 - 55 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth67.5 mm
Width80 mm
Height190.35 mm

Related product manuals