Tenda O1 User Manual

143
Verification
After the configuration, the NMS can connect to the SNMP agent of the CPE and can query and set some
parameters on the SNMP agent through the MIB.
8.6.6 Ping Watch Dog
With this function enabled, the device periodically pings target IP address to check the network connectivity and
identify whether the device malfunctions. If it malfunctions, the device will reboot automatically to ensure the
network performance.
Configuring Ping Watch Dog
Configuration Procedure
Step 1 Choose Advanced > Network Service.
Step 2 Enable the Ping Watch Dog function.
Step 3 Set the related parameters.
Step 4 Click Save on the bottom of this page.
----End

Tenda O1 Specifications

General

5 GHz	No
Bandwidth	2.4 GHz
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Placement	Wall
Certification	FCC/CE/RoHS
Product color	White
LED indicators	LAN, PoE, WLAN
International Protection (IP) code	IP64
Output voltage	9 - 12 V
Power consumption (max)	2.6 W
Security algorithms	WEP, WPA-PSK, WPA2-PSK
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Antenna features	Integrated antenna
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-30 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	67.5 mm
Width	80 mm
Height	190.35 mm