Tenda O1 User Manual

71
6.2 MAC Clone
This function is available only when the CPE works in WISP or Router mode.
6.2.1 Overview
If the device cannot access the internet after configuring internet settings, your ISP may have bound your
account with the MAC address of your computer that was used to verify internet connectivity after you
subscribed to the internet service. Therefore, only the computer can access the internet with the account.
In this case, you can try either of the following methods to address the issue.
Method 1
Step 1 Connect the computer to the device.
Step 2 Log in to the device’s web UI.
Step 3 Choose Network > MAC Clone to enter the configuration page.
Step 4 Click Clone Local MAC Address.
Step 5 Click Save.
----End
Method 2
Connect another device (such as a smart phone or tablet) to the device
Step 1 Log in to the device’s web UI.
Step 2 Choose Network > MAC Clone.
Step 3 Enter the MAC address of the computer that can access the internet in the MAC Address boxes.
Step 4 Click Save.
----End

Tenda O1 Specifications

General

5 GHz	No
Bandwidth	2.4 GHz
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Placement	Wall
Certification	FCC/CE/RoHS
Product color	White
LED indicators	LAN, PoE, WLAN
International Protection (IP) code	IP64
Output voltage	9 - 12 V
Power consumption (max)	2.6 W
Security algorithms	WEP, WPA-PSK, WPA2-PSK
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Antenna features	Integrated antenna
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-30 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	67.5 mm
Width	80 mm
Height	190.35 mm