Tenda O1 User Manual

121
8.3 Bandwidth Control (Only for O3)
This function is available only when the CPE works in WISP or Router mode.
8.3.1 Overview
If multiple devices access the internet through the CPE, bandwidth control is recommended, so that high-speed
file download by a device does not reduce the internet access speed of the other devices.
Choose Advanced > Bandwidth Control to enter the page.
Configuring Bandwidth Control
Step 1 Choose Advanced >Bandwidth Control.
Step 2 Set up the related parameters.
Step 3 Click Add.

Tenda O1 Specifications

General

5 GHz	No
Bandwidth	2.4 GHz
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Placement	Wall
Certification	FCC/CE/RoHS
Product color	White
LED indicators	LAN, PoE, WLAN
International Protection (IP) code	IP64
Output voltage	9 - 12 V
Power consumption (max)	2.6 W
Security algorithms	WEP, WPA-PSK, WPA2-PSK
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Antenna features	Integrated antenna
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-30 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	67.5 mm
Width	80 mm
Height	190.35 mm