Tenda O1 User Manual

158
Appendix
A.1 FAQ
Q1: I cannot log in to the web UI of the device by entering 192.168.2.1. What should I do?
A1: Try the following methods and try again:
− Ensure that the device has been connected to the power supply and the computer properly.
− Ensure that the IP address of the login computer is 192.168.2.X (X ranges from 2 to 254).
− Reset the device to factory settings.
Q2: How to reset the device to factory settings?
A2: Note: Resetting the device will clear all settings, and you need to configure it again.
Method One: 1 minute after the device is powered on, uncover the device, and hold down the reset button
for about 8 seconds.
Method Two: Log in to the web UI of the device, choose Tools > Maintenance, and click the Reset button.
Q3: How to judge whether the bridging signal is optimal when the devices are used for CCTV surveillance?
A3:
Method One: Observe the LED indicators of the two devices. The bridging signal is optimum when the LED1,
LED2 and LED3 indicators are solid on or flashing.
Method Two: Log in to the web UI of one device (default login address: 192.168.2.1), choose Status, and
check the wireless status on the following page:

Tenda O1 Specifications

General

5 GHz	No
Bandwidth	2.4 GHz
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Placement	Wall
Certification	FCC/CE/RoHS
Product color	White
LED indicators	LAN, PoE, WLAN
International Protection (IP) code	IP64
Output voltage	9 - 12 V
Power consumption (max)	2.6 W
Security algorithms	WEP, WPA-PSK, WPA2-PSK
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Antenna features	Integrated antenna
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-30 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	67.5 mm
Width	80 mm
Height	190.35 mm