Tenda O1 User Manual

138
----End
Verification
On the computer with the IP address of 202.105.106.55, start a browser and visit http://202.105.106.55:8080.
Then you can log in to the web UI of the CPE and configure the settings.
8.6.3 Reboot Schedule
Overview
This function enables the CPE to automatically reboot as scheduled. You can use this function to prevent wireless
performance degradation or network instability that occurs after a long CPE uptime.
Configuration Procedure
Step 1 Choose Advanced > Network Service.
Step 2 Enable the Reboot Schedule function.
Step 3 Specify a time at which the device reboots.
Step 4 Specify the dates on which the device reboots.
Step 5 Click Save on the bottom of this page.
----End
8.6.4 Login Timeout Interval
If you log in to the web UI of the CPE and perform no operation within the login timeout interval, the CPE logs
you out for network security. The default login timeout interval is 5 minutes.
Choose Advanced > Network Service to enter the page.

Tenda O1 Specifications

General

5 GHz	No
Bandwidth	2.4 GHz
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Placement	Wall
Certification	FCC/CE/RoHS
Product color	White
LED indicators	LAN, PoE, WLAN
International Protection (IP) code	IP64
Output voltage	9 - 12 V
Power consumption (max)	2.6 W
Security algorithms	WEP, WPA-PSK, WPA2-PSK
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Antenna features	Integrated antenna
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-30 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	67.5 mm
Width	80 mm
Height	190.35 mm