Tenda O1 User Manual

119
Name
Description
Test Progress
It specifies the process of speed test.
Test Result
It displays the test result.
AVG RX: It specifies the average of received speed.
AVG TX: It specifies the average of transmitted speed.
AVG Total: It specifies the average of the total connection speed.
Examples of Configuring the Speed Test
Assume that CPE1 works in AP mode, and CPE2 works in Client mode and bridges to the WiFi network of CPE1.
Then test the wireless speed between them.
Configuration Procedure
Step 1 Log in to the web UI of CPE2.
Step 2 Choose Advanced > Diagnose.
Step 3 Set Diagnose to Speed Test.
Step 4 Set IP Address of Peer AP to Manual.
Step 5 Enter the IP address of CPE1 to the IP Address box, which is 192.168.2.1 in this example.
Step 6 Enter the login user name and password of the web UI of CPE1 in the User name and Password boxes,
which are both admin in this example.
Step 7 Set Direction to Bidirectional.
Step 8 Click Start.

Tenda O1 Specifications

General

5 GHz	No
Bandwidth	2.4 GHz
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Placement	Wall
Certification	FCC/CE/RoHS
Product color	White
LED indicators	LAN, PoE, WLAN
International Protection (IP) code	IP64
Output voltage	9 - 12 V
Power consumption (max)	2.6 W
Security algorithms	WEP, WPA-PSK, WPA2-PSK
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Antenna features	Integrated antenna
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-30 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	67.5 mm
Width	80 mm
Height	190.35 mm