TESTO 300 - Graphics Reading Display Type

13 Using the product
31
13.1.2 Graphics reading display type
In the Graphics reading display type, the reading progression can be displayed
as a line diagram.
A maximum of 4 measurement parameters can be set at any one time. Only
those measurement parameters/units can be displayed that are available in the
List reading display type.
The measurement parameters/units can be adjusted if necessary:
✓
Measurement view is enabled.
1
Call up function: Graphics
2
Tap on in order to open selection list for measurement
parameters/units.
3
Select desired measurement data / units.

Selection is accepted automatically.