TESTO 300 - Wireless LAN

13 Using the product
43
Set language
✓
Country & language settings menu
1
Tap Language selection field.

The available languages for the selected country version are
displayed.
2
Select Language and tap .

The instrument is reconfigured to the selected language.
1
Back to the main menu: tap and .
13.2.6.2 Wireless LAN
A radio link, such as a Wireless LAN, is not relevant for carrying out
measurements.
Set up a connection to a Wireless LAN router or a Wireless LAN hotspot. The
connection enables the sending of measurement reports on site by e-mail.
1
Call up function: | Device Settings | Wireless LAN.
2
Tap Wireless LAN selection field.
3
Enable Wireless LAN: tap Off button or move grey point to the right.

Instrument switches to On. The point changes to green.

Display of all available Wireless LAN routers or Wireless LAN hotspots
in the vicinity.
4
Select Wireless LAN router or Wireless LAN hotspot.
5
Tap Connect.
6
It may be necessary to enter the password for the selected Wireless
LAN.

Connection is set up and shown by Connected.