TESTO 300 - Own Company Address; Hotspot

13 Using the product
46
8
Tap minute, set and confirm with OK.
9
Back to the Device Settings menu: tap | | .
Set time zone manually
1
Tap Time Zone.
2
Tap Autom. Time Zone and disable ( ).
3
Tap Select time zone.
1
Select desired time zone.
2
Back to the Device Settings menu: tap | | .
13.2.6.4 Own company address
Enter own company address. This information will be shown on the reports.
1
Call up function: | Device Settings | Own company address

Contact information input screen is opened.
2
Tap the required input field.

Keypad appears.
3
Enter the information via the keypad.
4
Confirm each input with ✓.
5
Back to the Device Settings menu: tap .
13.2.6.5 Hotspot
Enable a hotspot in order to be able to transmit readings to software / industry
software.
The interface must also be available in the software / industry software.
1
Call up function: | Device Settings | Hotspot