TESTO 300 - Corestream Reading Display Type

13 Using the product
32
13.1.3 Corestream reading display type
Search for corestream:
✓
Measurement view is enabled.
1
Call up function: Corestream
2
Start search:
3
Perform zeroing.

The measurement starts automatically after zeroing.
4
Align the flue gas probe in the flue gas
duct so that the probe tip is in the
corestream (area of the highest flue
gas temperature Max FT).
- Grey value/grey pointer: Display
of current flue gas temperature
- Orange value/orange pointer:
Display of maximum flue gas
temperature
- Reset values/pointer: