TESTO 300 - CO Undiluted; Smoke Number

14 Performing the measurement
71

Readings are automatically saved.

The measuring result is displayed after the measuring phase has
been completed.
2
End measurement early: .
14.2.6 CO undiluted
✓
A multi-hole probe (0554 5762) must be connected.
1
Call up function: | CO undiluted
2
Start measurement: tap .

Reading is displayed.
3
End measurement: tap .
14.2.7 Smoke number
The Smoke No. and Oil depos. parameters are only available for oil
fuels. The values calculated by a smoke tester can be entered.
Edit values
All values that can be modified have a dotted underlining.
1
Call up function: | Smoke No.
2
Tap required value.

Keypad appears.
3
Enter value.
4
Confirm entry: tap ✓.
5
Reset readings: tap .