TESTO 300 - Clean the Measuring Instrument; Drain Condensate Container

15 Maintenance
95
15.4 Clean the measuring instrument
>
If the housing of the measuring instrument is dirty, clean it with a damp
cloth.
Use distilled water or a weak solvent to clean the flue gas analyzer.
IMPORTANT
Leaking solvents and degreasers!
Damage to the instrument and sensors!
The following substances can cause damage to the device or the sensors:
- Solvent-containing vapours such as those contained in cleaning agents,
degreasers, wax polishes and adhesives
- Formaldehyde
Do not store cleaning cloths, solvents and degreasers, such as isopropanol,
in the case.
IMPORTANT
Strong or harsh alcohol or brake cleaner!
Damage to the instrument!
- Do not use any strong or harsh alcohol or brake cleaner.
15.5 Drain condensate container
The fill level of the condensate container can be read from the markings. Hold
the instrument horizontally or vertically to check the fill level.
CAUTION
Weak mix of acids in the condensate!
Minor injuries!
- Avoid skin contact.
- Make sure that the condensate does not run over the housing.