TESTO 300 - Print Data; Save

14 Performing the measurement
91
14.4.1 Print data
The current readings are printed via a Bluetooth
®
printer (accessories: Testo
printer 0554 0621).
Carry out print text settings
Print text settings can be carried out and the reading printout can be
supplemented with individual creator information (header: company address;
footer: name of technician), see Section 8.2.5.4 Own company address.
Print current readings
✓
The printer is switched on and within wireless range.
1
tap .

Protocols menu is opened.
2
Tap Print values.

The protocol is created and sent to the printer.

The protocol is printed.
Bluetooth
®
is always activated on the testo 300 NEXT LEVEL.
14.4.2 Save
The measurement data from the last measurement carried out of each
measurement type is saved on the measuring instrument.
Measurements that have been carried out can be saved to back up the
measurement data and for the subsequent creation of a report:
1
tap .

Protocols menu is opened.
2
Tap Save.

The measurement protocol is saved.
Only saved readings can be further processed at a later stage for a
report.