TESTO 300 - Page 89

14 Performing the measurement
87
Display
Measurement parameter
CO2
Carbon dioxide
qAnet
Flue gas loss without consideration of the calorific value range
Effn
Efficiency without consideration of the heat value range
qAgr.
Flue gas loss with consideration of the calorific value range
Effg
Efficiency with consideration of the calorific value range
Draught
Flue draught
ΔP
Differential pressure
CO
Carbon monoxide
uCO
Undiluted carbon monoxide
NO
Nitrogen monoxide
NOx
Nitrogen oxides
λ
Fuel-air ratio
AmbCO
Ambient carbon monoxide
O2ref
Oxygen reference
ΔT
Differential temperature
Dew Pt
Flue gas dewpoint temperature
Smoke 1
Smoke 2
Smoke 3
Smokenum
ber Ø
Only those measurement parameters and units that are enabled in the
reading display appear in the reading display, in the saved
measurement protocols and on the report printouts.
The settings only apply to the measurement type currently enabled.