TESTO 883 - Select display

9 WLAN connection – using the App
25
The password must be entered once.
4
Press Connect.

The WLAN connection to the thermal imager is established.
9.2.2 Select display
Second display

The WLAN connection to the thermal imager is established.
1
Selection -> 2nd display.

The display on the thermal imager is shown on your mobile end
device.
Remote

The WLAN connection to the thermal imager is established.
1
Selection -> Remote.

The display on the thermal imager is shown on your mobile end
device. The thermal imager can be controlled and settings made via
the mobile terminal device.
Gallery

The WLAN connection to the thermal imager is established.
1
Selection -> Gallery.

The saved images are displayed and can be managed.