TESTO 883 - Performing an update with the camera

12 Maintenance
84
2
Click on Configure thermal imager.

The Camera settings window is opened.
3
Select Instrument settings -> Firmware Update -> OK.

FW_T883_Vx.xx.bin is displayed.
4
Select Open.

Firmware update is performed.

Thermal imager is automatically restarted. Update complete.
In certain circumstances, the camera reports: Firmware update
finished. Please restart the device. A restart is not performed.
Action:
- After 10 seconds, switch off the camera; switch back on again after 3
seconds.

The current firmware version is displayed.
12.4.2 Performing an update with the camera
12.4.2.1 Preparing the camera

The rechargeable battery is fully charged or the camera is connected to
the mains adapter.
1
Switch on the camera.
2
Open the cover of the interface.
3
Connect the computer to the camera with the USB cable.

The camera is displayed as a removable medium in Windows Explorer.
12.4.2.2 Performing an update
1
Copy the FW_T883_Vx.xx.bin file to the removable medium using
drag & drop.
2
Eject the removable medium.
3
Disconnecting the USB connection.