TESTO 883 - Setting measuring functions

11 Performing the measurement
30
Action
Description
Result
Trigger operation
Aim at any subject.
Press trigger.
The subject aimed at
remains frozen on the
camera display for
checking purposes.
Cancel recording
Press
- left key or
- touch bottom left corner
Live image is displayed.
Image is not saved.
Recording
Aim at any subject.
Press trigger
Press trigger again.
Live image is displayed.
Image is saved.
Recording with
audio
Aim at any subject.
Select the Audio
commentary menu
Press trigger
In the Voice annotation
menu, select Recording
with audio
Audio commentary is made
with (connected) headset.
Press trigger again.
Live image is displayed.
Image is saved with audio
commentary.
For a higher resolution, in the Configuration menu, select the
SiteRecognition submenu.
11.2 Setting measuring functions
1
Open Measurement submenu (joystick or touchscreen).

The Measurement submenu opens with the measurement
settings:
• Pixel mark:
o New measuring spot: A new measuring point can be
added, moved or removed.
- Edit/Remove measurement point…
- Measurement point 1
- Measurement point 2
- …
o Center spot: the temperature measuring point in the
centre of the image is marked with white crosshairs and
the value is displayed.
o Hotspot: the highest temperature measuring point is
marked with red crosshairs and the value is displayed.