TESTO Saveris Instruction Manual

6 Product description
11
5.3 Exclusion of liability
The testo Saveris measurement data monitoring system was developed to
consolidate a large amount of measurement data from spatially separated data
loggers in the Saveris software, to document them without interruption and to
provide alarms in the event of irregularities.
The design of the testo Saveris measurement data monitoring system is not
intended for the purpose of undertaking control and regulation tasks. In
particular, the alarms are not to be seen as so-called critical alarms which are
able to avert dangers to life and limb or damage to property.
Liability on the part of Testo SE & Co. KGaA for damages from this type of
application is excluded.
6 Product description
6.1 System overview
Component Function
testo Saveris base
Readings are transmitted wirelessly or via an
Ethernet connection to the Saveris base which
then saves them. The data are then called up
by a computer from the Saveris base and
saved in a database.
Probes
Probes measure temperature, humidity and
other parameters and supply their
measurement data to data loggers. In the
testo Saveris measurement data monitoring
system, probes are either structurally
integrated into the data loggers or can be
mounted on these externally.
Radio data loggers for
testo Saveris
Saveris radio data loggers record readings
from probes and transmit these wirelessly via
radio link.
Ethernet data loggers for
testo Saveris
Saveris Ethernet data loggers record readings
from probes and transmit these via Ethernet
connection.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery