TESTO Saveris - Integrating a Saveris cockpit unit (optional)

7 Using the product
87
4
Select mobile zones.
4.1
If required: add tour description.
5
Select time period during which the tour is to be carried out.
6
Exit dialogue.

Query appears asking whether information should be saved.
7
Click [Apply settings].

The tour is saved and is displayed in the tour calendar as a planned
tour.
Tours that have not yet taken place can only be changed in the Tour
management navigation area.
7.3.2.3 Defining tours
This function is used to assign existing measurement data to tours at a
later stage.
1
In the navigation area, click on Mobile zone.
2
Select Tour definition.

The Define tour window is opened.
3
Define required tour. Via [From tour description] the additional
information of an existing tour description can be included for this tour.
4
Confirm entries using [Finish].

Tour is saved and displayed in the tour calendar.