TESTO Saveris - Setting up Alarm Groups

7 Using the product
70
In order to create a second time entry for the same day, repeat step 4
and step 5.
Two time periods can be specified per day.
6
Confirm by clicking on [OK].

The input window is closed and the modifications to the time control
are accepted.
7.2.6.3 Setting up alarm groups
Component alarms
No configuration changes are transferred to the Saveris radio data
logger/Saveris base until you have exited the Alarm management
menu!
You should therefore exit the Alarm management menu after any
changes.
1
Click on Alarm management in the navigation area.

The following submenus are displayed in the data area:
• Alarm settings base
• Alarm settings component
• Alarm settings channel
• Alarm recipients
• Alarm rules
• Comments for acknowledging alarms
2
Click on Alarm settings component.

The alarm settings for data loggers are shown in the display area.