TESTO Saveris - Assigning an IP address to the Saveris base (optional)

7 Using the product
71
Display
Explanation
Insert into new group
Creates a new alarm group.
Move to…
Move component/channel to another
alarm group.
Remove from group
Removes the component/channel
from the specified alarm group.
Delete this group
Deletes the entire alarm group.
Alarm setting components
List of the available components and
their affiliation to the selected alarm
group.
Alarm settings for groups
Enter the group name.
System settings System alarms: alarm activation for
notification when there are connection
problems, LoBat and power failure
Alarm conditions: trigger
acknowledged alarms after [min]
Alarm output Saveris base: settings
for relays, audible signal and light
signal.
[Apply settings]
Saves the alarm settings of an alarm
group.