7 Using the product
38
7 Using the product
7.1 Starting the Saveris software
1. Select [Start] | All programs | Testo | Saveris.
- The Testo Saveris software program window is opened with the Select
project dialogue.
2. Select the
• Only active project option, if you need to open the data for an ongoing
project
• All projects option, if you need to open the data for a finished project.
3. Select the project that is to be opened in the tree structure.
4. Confirm by clicking on [OK].
- The Testo Saveris software program window is displayed with the selected
data record in the foreground.
It can take a few minutes for the first readings to be displayed.
7.2 Use of testo Saveris software for
monitoring in the stationary area
7.2.1 General
The following section deals with the functionality of the testo Saveris software
which is relevant for measurement data monitoring in closed areas (production
plants, warehouses).
To Next Page
Loading...
