TESTO Saveris Instruction Manual

7 Using the product
57
At least one of these values must be activated to enable compression
of the table to be carried out.
3
Enter the time span under Extract and determine its unit. Possible
settings for the unit:
• sec (second)
• min (minute)
• h (hour)
• d (day).
4
Click on [OK].

The dialogue is closed and the table is shown in compressed format.
Determining largest reading
1
In the Edit | Search | Maximum menu, click on the curve for which the
largest reading needs to be determined.

The largest reading is displayed as marked in the table.
Adding Rows
1
In the Edit | Tools | Add rows menu, activate the selection that needs
to be displayed in the extra rows.

The additional rows are displayed in the table.
Compressing
Tabular values are displayed in compressed format. The limits for the
compression range and the additional min, max and mean values are displayed.
1
Click in the Edit | Tools | Compress menu.

A selection window is displayed.
2
Set calculation and extract and confirm with OK.

The table display is reduced to the selected min, max and mean
values and to the time period entered.
Dropping compression
Table compression is dropped again.
1
Click in the Edit | Tools | Drop compression menu.

TESTO Saveris Specifications

General

Humidity Range	0 to 100 %RH
Measurement Parameters	Temperature, Humidity
Data Transmission	Wireless
Alarm Function	Yes
Resolution	0.1 °C, 0.1 %RH
Radio Frequency	868 MHz, 915 MHz
Data Storage	Internal memory, Cloud
Power Supply	Battery