TESTO Saveris - Page 68

7 Using the product
68
Display Explanation
Device alarm Saveris Base
Setting options for the Saveris base
alarms
No PC connection: no response from
the PC.
Memory almost full: alarm when the
Saveris base memory overflows.
No GSM Network: alarm when there
is no GSM connection.
SMS overflow: alarm when an error
occurs in SMS transmission.
Power failure:
alarm when the base
power supply fails.
Alarm conditions
Re-trigger confirmed alarms after
[min]: re-triggers alarms that have
already been acknowledged following
a specified duration.
Alarm output Saveris Base Relays
Audible signal
Light signal
Advanced settings
No radio signal (stationary) [min]
No signal from network components
[min]
No radio signal (mobile) [h]
Apply settings
Saves the alarm settings.
Enable alarm time control
Activates the configured time control.
Alarm time control
Opens a window for configuring the
time control.
3
Setting up Saveris base alarm settings.
4
Click on Apply settings.
5
Exit Alarm management menu.

Alarm settings are transferred to the instruments.