Textron Cessna 182S - Page 183

CESSNA AIRCRAFT
COMPANY
MODEL 182/T182
WIRING DIAGRAM MANUAL
A12720
CLAMP
ROUND CAVITY
ACT
rFlM-
ROUND
VR
CAVITY
LEVER
CONTACT
CRIMPING
PIN
CONTACT
BODY PIN
PLACE APPROPRIATE CRIMP DIE INTO CRIMPING TOOL. PUSH DOWN ON LEVER TO OPEN
CLAMP. INSERT CONTACT ASSEMBLY, WITH CABLE CONDUCTORS IN PLACE, AGAINST THE
ROUND DIE CAVITY SHOULDER. LINE UP CENTER CONTACT CRIMPING PINS WITH CLEARANCE
HOLES (MAKE SURE THAT
THE CONDUCTOR INSERTED IN THE CONTACT
BODY IS IN LINE
WITH
THE CONTACT BODY PIN.) RELEASE
THE CLAMP LEVER, LOCKING
CONTACT
ASSEMBLY IN PLACE AND CRIMP CAREFULLY.
2755T-2-9
2755T-2-9
2755-2-9
King K-Grip
Connectors
Figure 204 (Sheet 4)
20-10-05
0 Cessna Aircraft Company
Page 209
Mar 1/2004
,..
.,