SECTION 1 CESSNA
GENERAL MODEL 208B (867 SHP)
GARMIN G1000
U.S.
DESCRIPTIVE DATA (Continued)
FUEL (Continued)
APPROVED FUEL ADDITIVES
One of the following fuel system anti-ice additives must be added to the
fuel as noted at the following concentrations. Use of fuel anti-ice
additives is required if freezing temperatures are expect during any part
of the flight. Use of static dissipater or biocide additives is optional.
• MIL-DTL-27686 (EGME) or MIL-DTL-85470 (DiEGME),
Type: Anti-Ice Additive, in a concentration of 0.10 to 0.15
percent by volume.
• MIL-DTL-27686 (EGME) or MIL-DTL-85470 (DiEGME),
Type: Anti-Ice Additive, in a concentration of 0.10 to 0.20
percent by volume.
• GOST 8313 (Fluid I), Type: Anti-Ice Additive, in a
concentration of 0.10 to 0.30 percent by volume.
• CIS TU6-10-1458 (Fluid I-M), Type: Anti-Ice Additive, in
a concentration of 0.10 to 0.30 percent by volume.
• T1301 (SH0396-92), Type: Anti-Ice Additive, in a
concentration of 0.10 to 0.15 percent by volume.
• DuPont Stadis 450, Type: Static Dissipator, in a
concentration as required to bring fuel up to 300
conductive units, not to exceed 1 Parts Per Million
(PPM).
• SOHIO Biobor JF, Type: Biocide, at a concentration not
to exceed 20 PPM of elemental boron (270 PPM of total
additive).
• Kathon FP, Type: Biocide, at a concentration not to
exceed 100 PPM of total additive.
• Refer to Section 8, Airplane Handling, Service and
Maintenance, Servicing, Fuel, for additional information
and recommended blending instructions for approved
fuel additives.
208BPHCUS-01
1-8
To Next Page
Loading...
