Model 310 Series DH Incubator 7-3Thermo Scientific
Section 7
Specifications
Weight
Net Weight Stainless Steel . . . . . . . . . . . . .205 lbs
Net Weight Copper . . . . . . . . . . . . . . . . .230 lbs.
Options/Accessories
HEPA filter . . Factory installed: Stock no. 190858
Battery back-up . . Free Standing: Stock no. 270078, 120VAC, 60Hz
Stock no. 270082, 220VAC, 50Hz
Humidity . . Factory installed: Stock no. 190463 - provides humidity
readout and low alarm
Inner door kit . . Customer installed: Stock no. 190650 - independent
. . . eight separate glass doors
Built-in Gas Guard . . Factory installed: Stock no. 190640 - CO
2
only, automatically switches supply tanks
Recorders . . Customer installed: Standard recorders used on water-
jacket incubators
Decontamination kits
HEPA filter, blower assembly, inner door gasket, etc. -
Stock no. 190868 (with HEPA filter),
Stock no. 190869 (without HEPA filter)
Copper Options
Interior ductwork .Solid copper: Stock no. 190725
Perforated shelfCustomer Installed: Stock no. 224166 - solid copper
Humidity PanCustomer Installed: Stock no. 237015 - solid copper
Copper interior kitFactory installed: Replace stainless steel duct work,
shelves, and
humidity pan with solid copper Stock no. 190870
Optional Data Outputs
Analog Factory installed: Stock no. 190544 - 0-1 volt
Analog Factory installed: Stock no. 190543 - 0-5 volt
Analog Factory installed: Stock no. 190512 - 4-20mA
Digital Factory installed: Stock no. 190523 - RS-485
(Compatible with Model 1535 Alarm Monitor only)
Certifications
Refer to the Declarations of Conformity at the back of this manual
To Next Page
Loading...
