Thermo Electron Corporation Model 42i Low Source Instruction Manual xv
About This Manual
This manual provides information about operating, maintaining, and
servicing the analyzer. It also contains important alerts to ensure safe
operation and prevent equipment damage. The manual is organized into the
following chapters and appendices to provide direct access to specific
operation and service information:
• Chapter 1 “Introduction” provides an overview of product features,
describes the principles of operation, and lists the specifications.
• Chapter 2 “Installation” describes how to unpack, setup, and startup the
analyzer.
• Chapter 3 “Operation” describes the front panel display, the front panel
pushbuttons, and the menu-driven software.
• Chapter 4 “Calibration” provides the procedures for calibrating the
analyzer and describes the required equipment.
• Chapter 5 “Preventive Maintenance” provides maintenance procedures
to ensure reliable and consistent instrument operation.
• Chapter 6 “Troubleshooting” presents guidelines for diagnosing analyzer
failures, isolating faults, and includes recommended actions for restoring
proper operation.
• Chapter 7 “Servicing” presents safety alerts for technicians working on
the analyzer, step-by-step instructions for repairing and replacing
components, and a replacement parts list. It also includes contact
information for product support and technical information.
• Chapter 8 “System Description” describes the function and location of
the system components, provides an overview of the software structure,
and includes a description of the system electronics and input/output
connections.
• Chapter 9 “Optional Equipment” describes the optional equipment that
can be used with this analyzer.
• Appendix A “Warranty” provides a copy of the warranty statement.
To Next Page
Loading...
