Thermo 42i - Diagnostics Menu

Operation
Diagnostics Menu
Thermo Electron Corporation Model 42i Low Source Instruction Manual 3-65
Date/Time The Date/Time screen and allows the user to view and change the system
date and time (24-hour format). The internal clock is powered by its own
battery when instrument power is off.
• In the Main Menu, choose Instrument Controls > Date/Time.
• Use , , and to move and change the value of
the date and time.
•Press to edit and save the new date and time.
Diagnostics Menu The Diagnostics menu provides access to diagnostic information and
functions. This menu is useful when troubleshooting the instrument. The
analog input readings and analog input voltages are displayed if the I/O
expansion board option is installed.
• In the Main Menu, choose Diagnostics.
DATE AND TIME:
19 MAR 2005 12:34:56 DATE AND TIME:
PRESS
 TO EDIT
19 MAR 2005 12:34:56 ?
SETTING: DAYS
¨ SET MONTHS
©ª CHANGE VALUE
 SAVE VALUE
RANGE AVG DIAGS ALARM
RANGE AVG DIAGS ALARM
DIAGNOSTICS:
>PROGRAM VERSION
VOLTAGES
TEMPERATURES
PRESSURE
FLOW
ANALOG INPUT READINGS
ANALOG INPUT VOLTAGES
ª
RANGE AVG DIAGS ALARM
DIGITAL INPUTS
RELAY STATES
TEST ANALOG OUTPUTS
INSTRUMENT CONFIGURATION
CONTACT INFORMATION