C-Link Protocol Commands
Hardware Configuration
B-32 Model 42i Low Source Instruction Manual Thermo Electron Corporation
temp comp
This command reports whether temperature compensation is on or off. The
example below shows the temperature compensation is off.
Send: temp comp
Receive: temp comp off
set temp comp onoff
These commands turn the temperature compensation on or off. The
example below turns temperature compensation off.
Send: set temp comp off
Receive: set temp comp off ok
Hardware
Configuration
contrast
This command reports the screen’s level of contrast. The example below
shows the screen contrast is 50%, according to Table B-8.
Send: contrast
Receive: contrast 5: 50%
set contrast level
This command sets the screen’s level of contrast, according to Table B-8.
The example below sets the contrast level to 50%.
Send: set contrast 5
Receive: set contrast 5 ok
Table B-8. Contrast Levels
Level Contrast Level
00%
1 10%
2 20%
3 30%
4 40%
5 50%
6 60%
7 70%
8 80%
9 90%
10 100%
To Next Page
Loading...
