Thermo 42i - Pin-Out of Rear Panel Connector in Single Range Mode; Default Analog Outputs in Single Range Mode

Operation
Range Menu
Thermo Electron Corporation Model 42i Low Source Instruction Manual 3-9
Figure 3-4. Pin-Out of Rear Panel Connector in Single Range Mode
Table 3-2. Default Analog Outputs in Single Range Mode
Note All channels are user definable. If any customization has been made to
the analog output configuration, the default selections may not apply.

Channel Pin Description
1 14 NO Analog Output
233 NO
2
Analog Output
315 NO
x
Analog Output
4 34 None
5 17 None
6 36 None
Ground 16, 18, 19, 35, 37 Signal Ground