Operation
Instrument Controls Menu
3-50 Model 42i Low Source Instruction Manual Thermo Electron Corporation
I/O Configuration The I/O Configuration menu deals with configuration of the analyzer’s I/O
system. The analog input configuration is displayed if the I/O expansion
board option is installed.
• In the Main Menu, choose Instrument Controls > I/O Configuration.
Output Relay Settings The Output Relay Settings menu displays a list of the 10 analog output
relays available, and allows the user to select the logic state and instrument
parameter for the relay selected.
Note The digital outputs may take up to one second after the assigned state
occurs to show up on the outputs.
• In the Main Menu, choose Instrument Controls > I/O Configuration >
Output Relay Settings.
HOST NAME:
CURRENT: ISERIES
ISERIES SSSSSS?
ABCDEFGHIJKLMN BKSP
OPQRSTUVWXYZ PAGE
0123456789 ./- SAVE
RANGE AVG DIAGS ALARM
I/O CONFIGURATION:
>OUTPUT RELAY SETTINGS
DIGITAL INPUT SETTINGS
ANALOG OUTPUT CONFIG
ANALOG INPUT CONFIG
RANGE AVG DIAGS ALARM
To Next Page
Loading...
