Operation
Instrument Controls Menu
Thermo Electron Corporation Model 42i Low Source Instruction Manual 3-49
Gateway The Gateway screen is used to edit the gateway address.
• In the Main Menu, choose Instrument Controls > Communication
Settings > TCP/IP Settings > Gateway.
• Use , , and to move and change the value of
the gateway address.
•Press to save the new address.
Host Name The host name screen is used to edit the host name. When DHCP is
enabled, this name is reported to the DHCP server.
• In the Main Menu, choose Instrument Controls > Communication
Settings > TCP/IP Settings > Host Name.
• Use , , and to move the cursor or change
between the edit field and the alpha page.
•Press to save the new letter in the alpha table or save the new
alpha page.
NETMASK:
CURRENT: 255.255.255.0
SET TO: 255.255.255.000
§¨
MOVE CURSOR
©ª
CHANGE VALUE
SAVE
RANGE AVG DIAGS ALARM
DEFAULT GATEWAY:
CURRENT: 192.168.1.1
SET TO: 192.168.1.1 1
§¨
MOVE CURSOR
©ª
CHANGE VALUE
SAVE
RANGE AVG DIAGS ALARM
To Next Page
Loading...
