Thermo 42i - Instrument Configuration; Contact Information

Operation
Diagnostics Menu
3-72 Model 42i Low Source Instruction Manual Thermo Electron Corporation
Instrument Configuration The Instrument Configuration screen displays information on the hardware
configuration of the instrument.
Note If the analyzer is in service mode, pressing on the item will
toggle it yes or no. 
• In the Main Menu, choose Diagnostics > Instrument Configuration.
•Press to toggle instrument configuration (in service mode only).
Contact Information The Contact Information screen displays the customer service information.
• In the Main Menu, choose Diagnostics > Contact Information.
INSTRUMENT CONFIGURATION:
>I/O EXPANSION BOARD YES
ZERO SPAN VALVES YES
LAG VOLUME NO
PERM DRYER NO
CONVERTER SS
DILUTION NO
AUTO CALIBRATION NO
RANGE AVG DIAGS ALARM
CONTACT INFORMATION:
CALL CENTER: 508-520-0430
WEB: WWW.THERMO.COM
RANGE AVG DIAGS ALARM