THORLABS DCC1645C User Manual

136 DCx camera
© 2010 Thorlabs
//------------------------------------
// Synchronization
//------------------------------------
// Enable auto-synchronization
is_DirectRenderer (hCam, DR_SET_VSYNC_AUTO, NULL, NULL);
// User defined synchronization: Query range and set position
UINT UserSync[2];
is_DirectRenderer (hCam, DR_GET_USER_SYNC_POSITION_RANGE,
(void*)UserSync, sizeof (UserSync));
INT Min = UserSync[0];
INT Max = UserSync[1];
INT SyncPosition = 400;
is_DirectRenderer (hCam, DR_SET_USER_SYNC,
void*)&SyncPosition, sizeof (SyncPosition));
// Disable synchronization
is_DirectRenderer (hCam, DR_SET_VSYNC_OFF, NULL, NULL);
//------------------------------------
// BMP file
//------------------------------------
// Load overlay from BMP file
is_DirectRenderer (hCam, DR_LOAD_OVERLAY_FROM_FILE,
(void*)”c:\test.bmp”, NULL);
//------------------------------------
// Delete overlay
//------------------------------------
// Delete overlay area
is_DirectRenderer (hCam, DR_CLEAR_OVERLAY, NULL, NULL);

THORLABS DCC1645C Specifications

General

Brand	THORLABS
Model	DCC1645C
Category	Security Camera
Language	English