152 DCx camera
© 2010 Thorlabs
7.3.21
is_GetAutoInfo
Syntax
INT is_GetAutoInfo (HIDS hCam, UC480_AUTO_INFO* pInfo)
Description
Using the is_GetAutoInfo() function, you can query status information of the auto control features.
This information is written to the _UC480_AUTO_INFO structure.
For further information on automatic control, please refer to the Functions for Automatic Image
Control chapter.
The status information returned in the _UC480_AUTO_INFO structure is only valid if at least one of
the auto control features has been enabled using is_SetAutoParameter() .
Input Parameters
_UC480_AUTO_INFO structure (see below)
Contents of the DCx camera_AUTO_INFO Structure
Supported auto control features
Sensor based Auto Shutter available
Auto Frame Rate available
Sensor based Auto Frame Rate available
Sensor based Auto Gain available
Auto White Balance available
Reserved space for extensions
70
221