THORLABS DCC1645C User Manual

265SDK (Software development Kit)
© 2010 Thorlabs
Input Parameters
hCam
Camera handle
nMaster
Sets the overall gain factor (0...100).
IS_IGNORE_PARAMETER
The master gain factor will not be changed.
IS_GET_MASTER_GAIN
Returns the master gain factor.
IS_GET_RED_GAIN
Returns the red channel gain factor.
IS_GET_GREEN_GAIN
Returns the green channel gain factor.
IS_GET_BLUE_GAIN
Returns the blue channel gain factor.
IS_GET_DEFAULT_MASTER
Returns the default master gain factor.
IS_GET_DEFAULT_RED
Returns the default red channel gain factor.
IS_GET_DEFAULT_GREEN
Returns the default green channel gain factor.
IS_GET_DEFAULT_BLUE
Returns the default blue channel gain factor.
IS_SET_ENABLE_AUTO_GAIN
Enables the auto gain functionality (see also
is_SetAutoParameter() ).
You can disable the auto gain functionality by setting a value for
nMaster.
nRed
Sets the red channel gain factor (0...100).
IS_IGNORE_PARAMETER
The channel gain factor will not be changed.
nGreen
Sets the green channel gain factor (0...100).
IS_IGNORE_PARAMETER
The green channel gain factor will not be changed.
nBlue
Sets the blue channel gain factor (0...100).
IS_IGNORE_PARAMETER
The blue channel gain factor will not be changed.
Return Values
IS_SUCCESS
Function executed successfully
IS_NO_SUCCESS
General error message
Current setting
When used together with
IS_GET_MASTER_GAIN
IS_GET_RED_GAIN
IS_GET_GREEN_GAIN
IS_GET_BLUE_GAIN
IS_INVALID_MODE
Camera is in standby mode, function not allowed.
Related Functions
is_SetHWGainFactor()
is_GetSensorInfo()
221
267
182

THORLABS DCC1645C Specifications

General

Brand	THORLABS
Model	DCC1645C
Category	Security Camera
Language	English