345SDK (Software development Kit)
© 2010 Thorlabs
This setting is not available for the currently set
exposure time.
This setting cannot be changed while automatic
exposure time control is enabled.
The BackBuffer surface cannot be created.
The BackBuffer mix surface cannot be created.
The BackBuffer overlay memory cannot be locked.
The BackBuffer overlay memory cannot be
created.
IS_NOT_SUPP_IN_OVL_SURF_MODE
Not supported in BackBuffer Overlay mode.
Back buffer surface invalid.
Back buffer surface not found.
Error releasing the overlay device context.
The back buffer timer could not be created.
The back buffer overlay was not enabled.
Only possible in BackBuffer mode.
IS_INVALID_WB_BINNING_MODE
Mono binning / mono sub-sampling do not support
automatic white balance.
IS_INVALID_I2C_DEVICE_ADDRESS
Invalid I2C device address.
The current image could not be processed.
IS_PARAMETER_SET_NOT_PRESENT
Parameter set is not present.
The camera type defined in the .ini file does not
match the current camera model.
IS_STARTER_FW_UPLOAD_NEEDED
The camera's starter firmware is not compatible
with the driver and needs to be updated
(see is_InitCamera() ).
192