THORLABS DCU22 Series Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
131
hCam
Camera handle
ODELS
balance (Example 4)
RGB_COLOR_MODEL_SRGB_D50: 0x0001
RGB_COLOR_MODEL_SRGB_D65: 0x0002
RGB_COLOR_MODEL_CIE_RGB_E: 0x0004
RGB_COLOR_MODEL_ECI_RGB_D50: 0x0008
RGB_COLOR_MODEL_ADOBE_RGB_D65: 0x0010
IS_AWB_CMD_GET_RGB_COLOR_MODEL
Returns the current color space for the auto white
balance (Example 5)
RGB_COLOR_MODEL_SRGB_D50: 0x0001
RGB_COLOR_MODEL_SRGB_D65: 0x0002
RGB_COLOR_MODEL_CIE_RGB_E: 0x0004
RGB_COLOR_MODEL_ECI_RGB_D50: 0x0008
RGB_COLOR_MODEL_ADOBE_RGB_D65: 0x0010
IS_AWB_CMD_SET_RGB_COLOR_MODEL
Sets the color space for the auto white balance
(Example 5)
RGB_COLOR_MODEL_SRGB_D50: 0x0001
RGB_COLOR_MODEL_SRGB_D65: 0x0002
RGB_COLOR_MODEL_CIE_RGB_E: 0x0004
RGB_COLOR_MODEL_ECI_RGB_D50: 0x0008
RGB_COLOR_MODEL_ADOBE_RGB_D65: 0x0010
pParam
Pointer to a function parameter, whose function depends on
nCommand.
cbSizeOfParam
Size (in bytes) of the memory area to which pParam refers.
Return values
IS_INVALID_PARAMETER
One of the submitted parameters is outside the valid range or is not
supported for this sensor or is not available in this mode.
IS_NO_SUCCESS
General error message
IS_NOT_SUPPORTED
The camera model used here does not support this function or
setting.
IS_SUCCESS
Function executed successfully
Related functions
is_SetAutoParameter()
Example 1
UINT nSupportedTypes = 0;
INT nRet = is_AutoParameter(m_hCam,
IS_AWB_CMD_GET_SUPPORTED_TYPES,
(void*)&nSupportedTypes,
sizeof(nSupportedTypes)
);
if (nRet == IS_SUCCESS)
{
if ((nSupportedTypes & IS_AWB_COLOR_TEMPERATURE) != 0)
{
// AWB type "Color Temperature" is supported
}

THORLABS DCU22 Series Specifications

General

Brand	THORLABS
Model	DCU22 Series
Category	Security Camera
Language	English