© 2016 Thorlabs Scientific Imaging372
DCx Camera Functional Description and SDK Manual
4.3.96 is_SetSensorTestImage
Syntax
INT is_SetSensorTestImage (HIDS hCam, INT TestImage, INT Param)
Description
is_SetSensorTestImage() enables a test image function in the sensor. You can select different test
images. The test images supported by a particular camera can be queried using the
is_GetSupportedTestImages() function. For some test images, the Param parameter provides
additional options. If the test image does not support additional parameters, Param will be ignored.
Attention
Manually changing the pixel clock will disable the test image mode.
Input parameters
The test image to be set. See also is_GetSupportedTestImages().
Additional parameter for used to modify the test image. Not
available for all test images.
Return values
An internal structure has an incorrect size.
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because
no driver has been loaded.
An attempt to initialize or select the camera
failed (no camera connected or initialization
error).
A capturing operation is in progress and must
be terminated before you can start another one.
The image memory has an inappropriate size to
store the image in the desired format.
The camera type defined in the .ini file does not
match the current camera model.
IS_INVALID_MEMORY_POINTER
Invalid pointer or invalid memory ID
One of the submitted parameters is outside the
valid range or is not supported for this sensor or
is not available in this mode.
An IO request from the uc480 driver failed.
Possibly the versions of the uc480.dll (API) and
the driver file (uc480_usb.sys) do not match.
No active image memory available. You must
set the memory to active using the
is_SetImageMem() function or create a
To Next Page
Loading...
Need help?
General
