THORLABS DCU22 Series Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging368
DCx Camera Functional Description and SDK Manual
4.3.94 is_SetSaturation
USB 2.0
USB 3.0
USB 2.0
USB 3.0
Syntax
INT is_SetSaturation (HIDS hCam, INT ChromU, INT ChromV)
Description
Using is_SetSaturation(), you can set the software color saturation.
Note
In the YUV format, color information (i.e. the color difference signals) is provided by the U and V
channels. In the U channel, this information results from the difference between the blue level and Y
(luminance), in the V channel from the difference between the red level and Y.
For use in other color formats than YUV, U and V are converted using a driver matrix.
Input parameters
hCam
Camera handle
ChromU
U saturation: value multiplied by 100.
Range: [IS_MIN_SATURATION …
IS_MAX_SATURATION]
IS_GET_SATURATION_U
Returns the current value for the U saturation.
ChromV
V saturation: value multiplied by 100.
Range: [IS_MIN_SATURATION …
IS_MAX_SATURATION]
IS_GET_SATURATION_V
Returns the current value for the V saturation.
Return values
When used with
IS_GET_SATURATION_U
IS_GET_SATURATION_V
Current setting
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_PARAMETER
One of the submitted parameters is outside the
valid range or is not supported for this sensor or
is not available in this mode.
IS_NO_SUCCESS
General error message
IS_SUCCESS
Function executed successfully
Related functions
is_SetColorMode()
is_SetColorCorrection()
is_SetColorConverter()

THORLABS DCU22 Series Specifications

General

Brand	THORLABS
Model	DCU22 Series
Category	Security Camera
Language	English