© 2016 Thorlabs Scientific Imaging158
DCx Camera Functional Description and SDK Manual
4.3.14 is_CopyImageMemLines
Syntax
INT is_CopyImageMemLines (HIDS hCam, char* pcSource,
INT nID, INT nLines, char* pcDest)
Description
is_CopyImageMemLines() copies the contents of the image memory described by pcSource and
nID to the memory area to whose starting address pcDest points. The function only copies the
number of lines indicated by nLines.
Attention
The allocated memory must be large enough to accommodate the in nLines given number of
image lines considering the image width and format (Bits per Pixel).
Input parameters
Pointer to the image memory
Number of lines to be copied
Pointer to the destination memory to copy the
image to
Return values
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because
no driver has been loaded.
An attempt to initialize or select the camera
failed (no camera connected or initialization
error).
IS_INVALID_MEMORY_POINTER
Invalid pointer or invalid memory ID
One of the submitted parameters is outside the
valid range or is not supported for this sensor or
is not available in this mode.
An IO request from the uc480 driver failed.
Possibly the versions of the uc480.dll (API) and
the driver file (uc480_usb.sys) do not match.
Function executed successfully
Related functions
is_AllocImageMem()
is_SetAllocatedImageMem()
To Next Page
Loading...
Need help?
General
