THORLABS DCU22 Series Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging92
DCx Camera Functional Description and SDK Manual
4.2.2 Selecting the Display Mode
Note
The uc480 driver provides different modes for displaying the captured images. We recommend
using the Bitmap mode or the Direct3D functions (only Windows) or OpenGL functions, depending
on your specific application.
For further information on the different display modes, see Basics: Image display modes.
Select the desired mode. The display mode has to be set before you start image capture.
is_SetDisplayMode()
Selection of the display mode.
When Bitmap mode (DIB) is active, image display has to be called explicitly for each image.
is_RenderBitmap()
Outputs the contents of the active image memory to a window.
is_SetDisplayPos()
Enables offsetting the image output inside the window.
Flowchart: Image display in DIB mode
Click in the figure to get help on the functions.

THORLABS DCU22 Series Specifications

General

Brand	THORLABS
Model	DCU22 Series
Category	Security Camera
Language	English