THORLABS DCU22 Series Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging366
DCx Camera Functional Description and SDK Manual
4.3.93 is_SetRopEffect
USB 2.0
USB 3.0
USB 2.0
USB 3.0
Syntax
INT is_SetRopEffect (HIDS hCam, INT effect, INT param, INT reserved)
Description
is_SetRopEffect() enables functions for real-time image geometry modification (Rop = raster
operation).
Input parameters
hCam
Camera handle
effect
IS_SET_ROP_MIRROR_UPDOWN
Mirrors the image along the horizontal axis.
IS_SET_ROP_MIRROR_LEFTRIGHT
Mirrors the image along the vertical axis.
Depending on the sensor, this operation is
performed in the camera or in the PC software.
IS_GET_ROP_EFFECT
Returns the current settings.
param
Turns the Rop effect on/off.
0 = Turn off
1 = Turn on
reserved
Reserved. 0 must be passed.
Return values
When used with
IS_GET_ROP_EFFECT
Current setting
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because
no driver has been loaded.
IS_CANT_OPEN_DEVICE
An attempt to initialize or select the camera
failed (no camera connected or initialization
error).
IS_INVALID_CAMERA_TYPE
The camera type defined in the .ini file does not
match the current camera model.
IS_INVALID_CAPTURE_MODE
The function can not be executed in the current
camera operating mode (free run, trigger or
standby).
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_MODE
Camera is in standby mode, function not allowed
IS_INVALID_PARAMETER
One of the submitted parameters is outside the
valid range or is not supported for this sensor or
is not available in this mode.
IS_IO_REQUEST_FAILED
An IO request from the uc480 driver failed.
Possibly the versions of the uc480.dll (API) and
the driver file (uc480_usb.sys) do not match.

THORLABS DCU22 Series Specifications

General

Brand	THORLABS
Model	DCU22 Series
Category	Security Camera
Language	English