© 2016 Thorlabs Scientific Imaging
6 Appendix
501
is_GetComportNumber()
is_GetSupportedTestImages()
is_GetTestImageValueRange()
is_ResetCaptureErrorInfo()
is_SetCameraLUT()
is_SetColorConverter()
is_SetSensorTestImage()
New function in software version 3.20
is_SetOptimalCameraTiming()
New functions in software version 3.10
is_EnableHdr()
is_GetHdrKneepointInfo()
is_GetHdrKneepoints()
is_GetHdrMode()
is_SetHdrKneepoints()
New functions in software version 3.00
is_GetEthDeviceInfo()
is_SetAutoCfgIpSetup()
is_SetPacketFilter()
is_SetPersistentIpCfg()
is_SetStarterFirmware()
6.7 Certifications and Compliances
Compliance with the directives is demonstrated by meeting the following standards:
EN 61000-6-3:2001 +
A11:2004
UL 60950-1, 2nd Edition, 2011-12-19
CSA C22.2 No. 60950-1-07, 2nd Edition,
2011-12
UL 60950-1, 2nd Edition, 2011-12-19
CSA C22.2 No. 60950-1-07, 2nd Edition,
2011-12
EN 61000-6-3:2001 +
A11:2004
UL 60950-1, 2nd Edition, 2011-12-19
CSA C22.2 No. 60950-1-07, 2nd Edition,
2011-12
UL 60950-1, 2nd Edition, 2011-12-19
CSA C22.2 No. 60950-1-07, 2nd Edition,
2011-12
*1
This equipment has been tested and found to comply with part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential