© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
315
4.3.72 is_ReadEEPROM
Syntax
INT is_ReadEEPROM (HIDS hCam, INT Adr, char* pcString, INT Count)
Description
Using is_ReadEEPROM(), you can read the contents of the camera EEPROM. Besides the hard-
coded factory information, the EEPROM of the DCx Camera can hold 64 bytes of user data.
Input parameters
Starting address for data reads Value range:
0...63
Pointer to the buffer for the data to read (min.
size = Count)
Number of characters to read
Return values
An internal structure has an incorrect size.
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because
no driver has been loaded.
An attempt to initialize or select the camera
failed (no camera connected or initialization
error).
A CRC error-correction problem occurred while
reading the settings.
One of the submitted parameters is outside the
valid range or is not supported for this sensor or
is not available in this mode.
An IO request from the uc480 driver failed.
Possibly the versions of the uc480.dll (API) and
the driver file (uc480_usb.sys) do not match.
The camera does not contain any calibration
data.
The camera model used here does not support
this function or setting.
Function executed successfully
Related functions
is_WriteEEPROM()
To Next Page
Loading...
Need help?
General
