© 2016 Thorlabs Scientific Imaging
4 Programming (SDK)
369
4.3.95 is_SetSensorScaler
Syntax
INT is_SetSensorScaler (HIDS hCam, UINT nMode, double dblFactor)
Description
is_SetSensorScaler() enables internal image scaling for some sensors. This allows to reduce the
image resolution by adjustable factors. Thus, the amount of data from high resolution sensors can
be reduced.
Note
Internal image scaling is only supported DCC1240x and DCC3240x series cameras.
The use of the internal scaler has no effect on the attainable frame rate.
Input parameters
IS_ENABLE_SENSOR_SCALER |
IS_ENABLE_ANTI_ALIASING
Enable image scaling with smoothed edges
(anti-aliasing effect)
Return values
IS_CANT_COMMUNICATE_WITH_DRIVER
Communication with the driver failed because no driver
has been loaded.
An attempt to initialize or select the camera failed (no
camera connected or initialization error).
The camera type defined in the .ini file does not match the
current camera model.
One of the submitted parameters is outside the valid
range or is not supported for this sensor or is not available
in this mode.
An IO request from the uc480 driver failed. Possibly the
versions of the uc480.dll (API) and the driver file
(uc480_usb.sys) do not match.
The camera does not contain any calibration data.
The camera model used here does not support this
function or setting.
Function executed successfully
To Next Page
Loading...
Need help?
General
