THORLABS DCU22 Series Description And Sdk Manual

© 2016 Thorlabs Scientific Imaging196
DCx Camera Functional Description and SDK Manual
hCam
Camera handle
IS_NEW_DEVICE
A new camera was connected.
IS_DEVICE_REMOVAL
A camera was removed.
IS_WB_FINISHED
Automatic white balance control is completed
(only if this control was started using the
IS_SET_AUTO_WB_ONCE function).
IS_AUTOBRIGHTNESS_FINISHED
Automatic brightness control is completed (only
if this control was started using the
IS_SET_AUTO_BRIGHTNESS_ONCE function).
IS_CAMERA_MEMORY
In the camera memory mode an image
acquisition iteration is finished.
IS_CONNECTIONSPEED_CHANGED
The connection speed of a USB 3 DCx camera
changed from USB 2.0 to USB 3.0 or from USB
3.0 to USB 2.0.
hWnd
Application window for receiving the message.
NULL disables the message designated by the
which parameter.
Return values
IS_INVALID_CAMERA_HANDLE
Invalid camera handle
IS_INVALID_PARAMETER
One of the submitted parameters is outside the
valid range or is not supported for this sensor or
is not available in this mode.
IS_NO_SUCCESS
General error message
IS_SUCCESS
Function executed successfully
Related functions
is_InitEvent()

THORLABS DCU22 Series Specifications

General

Brand	THORLABS
Model	DCU22 Series
Category	Security Camera
Language	English